The goal for this mod is to turn the MOBO 90 degrees and make room for a 360mm RAD on front and back of the case
Attachment 25212Attachment 25213
Printable View
The goal for this mod is to turn the MOBO 90 degrees and make room for a 360mm RAD on front and back of the case
Attachment 25212Attachment 25213
Removed guts, Started MOBO mounting trey. I want to inset the mobo on the top.... hence the gaping hole. Started the rad mount for the front.
Attachment 25214Attachment 25215Attachment 25216Attachment 25217Attachment 25218Attachment 25219
Keep the photos coming! It's hard to see your direction so far :tongue:
will do
More posts tomorrow.
Just would like to say goodbye to a trusty friend. Died during his first mod. We both thought he had found his calling.
Attachment 25606
Pored some out for the homie "Dremel". IN MY MOUTH
Here is some beer porn.
Attachment 25607Attachment 25608
Motherboard 90 degrees set, room for psu "check", room for rad's "check". A little choppy but it will be fixed.
Attachment 25609Attachment 25610
More tomorrow
Attachment 25690
Next step Painting
Attachment 25700Attachment 25701
I decided to add some fan cord ports
Attachment 25702
Any suggestions? This is my first mod and any tips, tools, tricks are appreciated.
THANKS
You would not be amiss with more beer porn. Especially since I can't have none for a while.
Will do.
Pub smutt
Attachment 25736
painting tomorrow.......................... Any suggestions on exterior ? Mat black interior.
change of plans: Paint prep day led to the removal of the original side panel mounting bar. This will not be the panel i will be using. The final panel will be a piece of acrylic
Attachment 25759