-
Boycott shampoo! Demand the REAL poo!
My First WC loop
so here is my new water loop for you guys took some pictures with my phone. also did a Delid on my i7 4770k
my pc in the rig gallery
http://www.clanaod.net/forums/showth...l=1#post766843
In the beginning
20140317_181117 by Frostythehitman21, on Flickr
20140522_183917 by Frostythehitman21, on Flickr
back on air @ 4.2
water cooling loop
20140801_221549 by Frostythehitman21, on Flickr
20140801_221706 by Frostythehitman21, on Flickr
Delid cpu i used the hammer and wood method
20140801_221758 by Frostythehitman21, on Flickr
spaghetti any one, kinda looks like the inside of a dash board in a car
20140801_221816 by Frostythehitman21, on Flickr
triple 120 rad bad pic sorry
20140801_221848 by Frostythehitman21, on Flickr
double 120 rad
20140801_221903 by Frostythehitman21, on Flickr
Gpu block
20140801_221921 by Frostythehitman21, on Flickr
20140801_221549 by Frostythehitman21, on Flickr
parts list
Rads
Triple 120 EK-Coolstream PE 360
Double 120 EK-Coolstream PE 240
both are high FPI count rads in push pull configuration
GPU Block EK-FC780 GTX TI Copper Plexi CSQ Clean
CPU Block XSPC RayStorm Intel/AMD block
Reservoir XSPC D5 pump/ photon 270 combo
Tube Primochill Adv LRT
Fittings XSPC low pro Compression Fittings one T and one Ball valve for drain
Fans Yate Loon 120 good static pressure fans at a lower speed may try others as time goes on and funds recoup
Fan Controller NZXT sentry mix 2 cool led, and 6 channels at 30 watts per channel
Thermal paste on the gpu and cpu i used the EK paste that game with the block working the best for me out off all the paste i have
on the inside of the cpu for the delid i used Coollabratory Liquid Ultra
Loop order res>triple rad>cpu>gpu>double rad>back home to res
Coolant first i ran the loop with distilled water, for 2 days with a cleaning agent, that was after flushing every block and rad then i added the good stuff Mayhems Pastel Suneset Yellow
also added more Ram ADATA ddr3 2400 at 32 now not really happy with this ram maby a change in the future
and added sleved cables Silver Stone two tone black and gold
overclocking hit 4.6 last night but not stable had good temps though
staying at 4.3 for now because its stable and i am very new to overclocking with intel always had Amd before this pc
-
Criminal Lawyer is a redundancy
My First WC loop
Nice setup. I prefer distilled water with a piece of silver. Havent had any luck with any of the coolants and additives. They usually ended up ruining the hoses, cause the water pump gummy up and stick, and coat the water block in a film that reduces their cooling ability.
What temperatures were you getting when on a load. If temperatures are low enough then you should be able to add more voltage so you can overclock further.
-
If I'm not back in 5....wait longer!
Nice delidding. But MAN, dem cables. :(
-
Keep honking. I'm reloading
Seems great, and the cable managemnt is good (no need to worry about the the wires behind the tray. Some people will try to make them really neat and the them off, only to be a little annoyed when it is time to add more components.
For your overclock, what voltage are you using? with liquid cooling you can push the CPU to 1.35V (and a little higher if you closely monitor the temperatures as after 1.35V, the temperatures start to increase more rapidly)
-
Boycott shampoo! Demand the REAL poo!
I dont have any sold numbers on anything yet, I will make a new post with the hard numbers once i get some free time, so busy with work lately summer is busy time for a mechanic. also i feel like my ram is acting strange it says in bios that 2 sticks are running at 1600 and 2 are 1333. im going to update bios and possible get different ram. but to answer you question i was at 4.2 cant remember volts on air, then i was at 4.3 @1.25 on water, now im back down to 4.0 at 1.18. i forgot to save my settings for stable 4.3 oc then i went to 4.6 and i had to clear cmos. still not used to ocing this i7 yet still doing some research but im going to try and get as high as i can then back down a little for 24/7 clock.
-
Knee High to a Worms Ass
That looks pretty sweet. I really like the yellow liquid in the clear tubing, though I'm not a huge fan of the additive approach (I also prefer distilled + silver).
Whats going on with the T, just have that for easy flushing when needed?
-
Boycott shampoo! Demand the REAL poo!
yeah my half ass take on a drain loop. I know i was kinda skeptical about the additive approach, but i think most problems was from contaminants. I flushed this system out good but only time will tell if all else fails i have 3 gallons of distilled water.I also was thinking about trying distilled water with an automotive grade additive, but for now hopefully this works out
-
Keep honking. I'm reloading
For liquid cooling, it is best to avoid pure distilled water only. there has to be some kind of additive in order to prevent any bacterial growth which may gunk up the tiny fins in the waterblock. Most cooling fluids will have special chemicals in them in order to prevent bacteria from gunking things up (especially for loops which never see a really high liquid temperature.
-
Keep honking. I'm reloading
To add onto that, this is largely for environments where there is a greater chance of additional bacteria entering the liquid. While an infection of the liquid cooling system is not common, when it does happen, it can be very annoying as the waterblocks have to be taken apart for cleaning and then cleaning solutions have to be run through the radiators.
-
Knee High to a Worms Ass
That is where the silver comes in, that is your additive when using distilled water. The silver (which you can buy in 99.99% pure silver variants) will act as an antimicrobial, preventing exactly what you are talking about. The major benefit to this over a liquid additive is that you run significantly less chance of anything clogging your loop. Many chemical additives can easily cause buildup throughout the loop and be come just as bad as the bacteria they are meant to prevent.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules