Results 1 to 7 of 7
  1. #1
    If I'm not back in 5....wait longer! AOD Member AOD_Jayson201's Avatar
    Rank
    Private
    Division
    Battlefield
    Status
    Active
    Join Date
    Jun 2015
    Age
    21
    Posts
    95

    Default Vengeance C70 Mil Green Case

    Click image for larger version. 

Name:	c70_g_top.jpg 
Views:	57 
Size:	53.5 KB 
ID:	17333Click image for larger version. 

Name:	c70_g_up.jpg 
Views:	57 
Size:	40.6 KB 
ID:	17334

    I've been contemplating getting this case for a while now, just because it looks awesome.
    What I can't decide is whether I should get it, and wait until I build my next rig, or get it and swap all my current shit into it.
    By the way,
    I'm an indecisive person.
    Opinions are welcome! :D

  2. #2
    "Oh great, here comes Captain Dipshit in a LAV" - Pyle986 AOD Member AOD_Grady666's Avatar
    Rank
    Specialist
    Division
    Battlefield
    Status
    Active
    Join Date
    Apr 2015
    Location
    US
    Age
    22
    Posts
    1,418

    Default

    Quote Originally Posted by AOD_Jayson201 View Post
    Click image for larger version. 

Name:	c70_g_top.jpg 
Views:	57 
Size:	53.5 KB 
ID:	17333Click image for larger version. 

Name:	c70_g_up.jpg 
Views:	57 
Size:	40.6 KB 
ID:	17334

    I've been contemplating getting this case for a while now, just because it looks awesome.
    What I can't decide is whether I should get it, and wait until I build my next rig, or get it and swap all my current shit into it.
    By the way,
    I'm an indecisive person.
    Opinions are welcome! :D
    My personal recommendation: WAIT until you build your next rig, you never know what components youll end up choosing, and whether or not you will still want this case by then; There may be a new one that comes out that you want/like way more than the C70.

    Other than that aside: Its a great case for Airflow, it has good(not great, comparably to some more modern cases, but its in that top 75%) air filtration and mounts for up to x6 140mm Fans + x5 120mm Fans (x6 120/140mm Fan Mounts and x5 120mm Fan mounts).

    ** Only read below if your not already familiar w/ Positive and Negative air pressure and Fan Intake filtering. IF SO just skip to the section below the dashed lines(---).

    If you do decide to get this case, at any point: *BE SURE TO GET FAN INTAKE FILTERS* Even if the cases front x2 120mm Fans come with built-in case mesh filtering, get fan filters anyway, it wont impede airflow significantly and will keep dust from collecting inside your rig and in the front intake area. and always lean on the side of positive air pressure, having more Intake fans than you do exhaust, this reduces dust build-up considerably compared to negative-pressure(More exhaust than intake).

    I always say(and follow the rule myself; If I don't have a formal intake filter for any fan I will make one. From the Fine-mesh used on Windows to block bugs or, Ive also been told that women's pantyhose/leggings works REALLY WELL, seriously think about the material, its very very fine black "synthetic feeling" type fabric mesh with tiny holes, perfect for fan intake filters!)

    Fan Filters(My recommendations)

    140mm Fan Filters(Silverstone Black Magnetic 140mm Filters): http://www.newegg.com/Product/Produc...-257-_-Product $9.50 USD (When buying 2 or more)

    120mm Fan Filters(Silverstone Black Magnetic 120mm Filters): http://www.newegg.com/Product/Produc...-249-_-Product $9.50 USD (When buying 2 or more)

    *Both $9.99 USD Otherwise, but I'd assume if you bought either or both filter(s) then you would get at LEAST two.

    For fans, there are a few I *personally* really love and are very high-quality w/ great static pressure; It depends on your budget, i include (1) budget case fan, the best I feel you can get at the price, one(2) that's good middle-ground, and one(3) "budget non-issue" fan for 120's and 140mm Fans:

    120mm Fans

    1) Coolermaster SickleFlow 120mm 2000RPM+ w/ 2.94mmH20 Static pressure(my personal favorite fan on a budget): http://www.newegg.com/Product/Produc...-091-_-Product $9.99
    * They come in Green, Red, And Blue LED + No LED Variants so they should match anything
    ^^^ My recommendation as budget

    2) Rosewill RFA-120-K 120mm 2000RPM+ Non-static pressure optimized(They move a TON of air, but I dont recommend them for intakes or any location where there is obstruction of air flow, since their static pressure isnt very good, but i own one and they move a metric ASS TON of air, you can put your hand over the exhaust portion[I have one I use as one of my exhaust fans, their best used as either top intake/side intake or exhaust fans] from 1.5-2Feet away and feel steady air): http://www.newegg.com/Product/Produc...-048-_-Product $9.99
    * Also come in No, Red, and Blue LED Variants

    3) Coolermaster Jetflo 120mm 2000RPM 2.72mmH20[Leans more towards VERY HIGH airflow but also has very good static pressure, not as much as SP120's though, I personally recommend these due to their good balance of static-pressure and Airflow]: http://www.newegg.com/Product/Produc...-191-_-Product $16.99

    ALTERNATE

    3[ALT]) Corsair SP120 High-Performance Static-pressure Optimized[Comes w/ Red,White, and Blue interchangeable Rings] 3.1mmH20 1650RPM: http://www.newegg.com/Product/Produc...-040-_-Product

    ** I recommend going with 120mm Fans due to their Higher static-pressure ratings, RPM, and Price^ The only real difference in 140's will be their amount of noise, It will be much lower due to the fact that bigger blades dont have to spin as fast to move an equivelent amount of Air, but even then specsheets still seem to show 120's have better Static-pressure and Airflow, Sacrificing some silence, with the Jetflo's its a mixed bag but ive seen alot of people say they can get VERY loud, but they also at the same time say they Move A TON of air through HDD Cages,Front Intake bezels,ETC due to their excellect static pressure

    140mm Fans


    1) Bitfenix Spectre Pro 140mm 1200RPM 84CFM 1.82mmH20: http://www.newegg.com/Product/Produc...82E16835345030 $15.99

    2) Fractal Design Venturi 1500RPM 78CFM 1.94mmH20: http://www.newegg.com/Product/Produc...82E16835352024 $21.99

  3. #3
    Criminal Lawyer is a redundancy Tetsuo's Avatar
    Rank
    Forum Member
    Division
    None
    Status
    Active
    Join Date
    Jul 2014
    Posts
    221

    Default

    I approve of this case(C70) I got the black and LOVE IT TO DEATH! Its nice handles for carrying it around even with water cooling in it. The handles are strong. Very rugged since made of pretty much 99% aluminium. Great air flow from the front since can run SP fans to pull air through the filter then behind the HDD cage run another SP and out the rear if wanted a AF fan and the top if wanted another AF 140mm to pull air out. And it will fit a h100I with a push pull config easy done it. Also got a fan in the front bottom which pulls more in.

  4. #4
    If I'm not back in 5....wait longer! Vector9's Avatar
    Rank
    Forum Member
    Division
    None
    Status
    Active
    Join Date
    Dec 2014
    Age
    37
    Posts
    50

    Default

    I purchased my case 10 years ago... I got it huge so I could always fit new crap. 3 motherboards, 2 power supplies, lots of other crap, and countless graphics cards later, im not disappointed. Moral of the story... make sure its big enough.

  5. #5
    If I'm not back in 5....wait longer! AOD Member AOD_Jayson201's Avatar
    Rank
    Private
    Division
    Battlefield
    Status
    Active
    Join Date
    Jun 2015
    Age
    21
    Posts
    95

    Default

    See my sister wants me to get it and send it to her so she can give it a custom paint job. Now i feel obligated to get it!

  6. #6
    Criminal Lawyer is a redundancy Tetsuo's Avatar
    Rank
    Forum Member
    Division
    None
    Status
    Active
    Join Date
    Jul 2014
    Posts
    221

    Default

    Quote Originally Posted by AOD_Jayson201 View Post
    See my sister wants me to get it and send it to her so she can give it a custom paint job. Now i feel obligated to get it!
    Recommend a nice side window to go with the pant or if just want a nice clear or little smoked window or even colored. I personally want one since don't like the 140mm holes in the side window.http://mnpctech.com/mnpctech-clear-c...n-holes-120mm/

  7. #7
    "Oh great, here comes Captain Dipshit in a LAV" - Pyle986 AOD Member AOD_Grady666's Avatar
    Rank
    Specialist
    Division
    Battlefield
    Status
    Active
    Join Date
    Apr 2015
    Location
    US
    Age
    22
    Posts
    1,418

    Default

    Quote Originally Posted by AOD_Tetsuo View Post
    Recommend a nice side window to go with the pant or if just want a nice clear or little smoked window or even colored. I personally want one since don't like the 140mm holes in the side window.http://mnpctech.com/mnpctech-clear-c...n-holes-120mm/
    +1 Smoked Windows Look ABSOLUTELY GREAT. As long you have a decent accent LED Strip/Light Setup inside the case, thats not TOO bright, but just enough for ambiance.

    Recommend a Smoked Side panel window w/ LED Strips(Bitfenix,Darkside,ETC) Accented along the backside of portions of the board and maybe around the window, not too much though :P


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
vBulletin Skin By: ForumThemes.com
Top